Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] HP 66103A modular powersupplies

Status
Not open for further replies.
zainka

zainka

Full Member level 2
Full Member level 2
Joined
Nov 18, 2004
Messages
137
Helped
5
Reputation
10
Reaction score
3
Trophy points
1,298
Location
No(r)way
Activity points
1,659
The rather old 66103A powersupplies, and similar, has a 48pin connector behind, usually connected to a DC module connector like 5060-3386 which normally gives the pos./neg. terminals and the sens signals. But the pinout of the 48pin connector is hidden and not found in the regular documentation. Does anyone know this pinout? I have determind partly the pinout by simply looking at the connector, but I cant back-enginear all the functions.

If you know of any documentation from HP, now keysight, giving this information it would be highly appreciated.

Vidar
 

Maybe you are just smarter than me.
Thanks for helping, much appreciated.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top