[SOLVED] 350mA led low brightness why

Status
Not open for further replies.
P

phobos1

Full Member level 2
Joined
Jan 18, 2010
Messages
135
Helped
15
Reputation
30
Reaction score
15
Trophy points
1,298
Location
Salem, Tamil Nadu, India
Visit site
Activity points
2,112
i designed a 1watt 350ma led driver i get a 350ma at output to drive the led but the leds brightness is low... if anyone has gone throught such problem help me.....

I am using a flyback converter.......and not using output inductor will it be a problem.....
 

Give us more detailed information about circuit, such as measured voltage, measured current, how many LEDs on array, etc...


+++
 

What is the forward voltage of the LED ? You can measure the current flowing through the LED using some ammeter/multimeter to ensure that 350mA (required current) is flowing ? Did you limited the current using any series resistors?
 

forward voltage of led is 3.5 i have three led in series and current rating is 350mA


i get a 10.7 volts in total with 350mA .......

i have not added any series resistor....

just the output of the flyback transformer is fed with a diode and capacitor inbetween led and transfromer winding for rectification and filtering
 

@ phobos 1
As I understand it:
1) You want the LED driver to give 350mA.
2) You've measured it, and it does give 350mA.

So there's nothing wrong with the LED driver. The only problem seems to be that the LEDs are not as bright as you hoped.
 
Last edited:
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…