32 Mhz clock pulse outut from pic24f16ka102

#include "p24Fxxxx.h"

_FWDT	(FWDTEN_OFF);
_FOSCSEL(FNOSC_FRCPLL);
_FOSC(FCKSM_CSECMD & POSCFREQ_MS & OSCIOFNC_ON & POSCMOD_NONE)

int main(void)
{

// Use Internal 8 MHz Clock
OSCCON = 0x0000;
CLKDIV = 0x0000;
return 0;
}

#include "p24Fxxxx.h"

_FWDT	(FWDTEN_OFF);
_FOSCSEL(FNOSC_FRCPLL);
_FOSC(FCKSM_CSECMD & POSCFREQ_MS & OSCIOFNC_OFF & POSCMOD_NONE)

int main(void)
{

// Use Internal 8 MHz Clock
OSCCON = 0x0000;
CLKDIV = 0x0000;
REFOCON = 0x8000;

 T2CON = 0x00; //Stops the Timer2 and reset control reg.
    TMR2 = 0x00; //Clear contents of the timer register4
    T2CONbits.TCKPS = 0b10; // 1:64 prescale
    T2CONbits.TCS = 0;      // internal clock source
    IPC1bits.T2IP = 0x01; //Setup Timer1 interrupt for desired priority
    IEC0bits.T2IE = 1; //enable interrupts for timer2
    T2CONbits.TON = 1;

    OC1CONbits.OCTSEL = 0; //use timer 2
    OC1CONbits.OCM = 0b101; //single output pulse generation mode
    OC1CONbits.OCSIDL = 0; //continue in idle mode
    IEC0bits.OC1IE = 0;
    OC1RS=2;
    OC1R=1; // first match
    PR2 = 3;
    
while(1){
    
}
return 0;
}

void __attribute__((__interrupt__)) _OC1Interrupt( void )
{

/* Interrupt Service Routine code goes here */
IFS0bits.OC1IF = 0; // Clear OC1 interrupt flag
//OC1CONbits.OCM = 0b100; //single output pulse generation mode
//T2CON = 0x00;
}