3-way uneven Wilkinson Power Divider

[raed_microwave]

three way wilkinson power divider

Hi guys,

I'm designing a 3-way wilkinson power divider and I need any ideas to design this circuit
thanxxxx for help

 

[Kohi_boy]

wilkinson power splitter

If its 3 way EVEN, you can try to read up microwave engineer by POAZR. There are some good reference in that book.

 

[raed_microwave]

3 way wilkinson divider

the Power Divider is uneven not even.

 

[yendori]

uneven wilkinson divider

You can use a "Kouzoujian Power Splitter."


Check out this link. Look for Jack's Power Spitter. You can use this topology, but modify it to get the "splits" you need.

**broken link removed**

Rod

 

[RF-OM]

3-way wilkinson power splitter

3-way Wlkinson combiner will be not so hard to design and build if you need smaller insertion loss. If loss is not the main concern resistive splitter can be used.

 

[raed_microwave]

3-way planar wilkinson

You can use a "Kouzoujian Power Splitter."


Check out this link. Look for Jack's Power Spitter. You can use this topology, but modify it to get the "splits" you need.

**broken link removed**

Rod

Thanks for this webside but I have to used only Wilkinson type bcz my topic in my Master thesis is 3-way uneven Wilkinson Power divider.