Configure frequency hopping spread spectrum (FHSS)

[chipsnsystems]

Hello dear Friends ;-),

I would like to use frequency hopping spread spectrum (FHSS) to communicate between two PIC16f88 micro controllers by using HopeRF RFM12b modules.

During the past few months I have been searching the web and I have learnt quite a bit about how to configure the RFM12b modules. I have pasted the link to two of the best tutorials I have managed to find so far below.

http://blog.strobotics.com.au/2008/01/08/rfm12-tutorial-part1/

http://www.picprojects.net/rfm12/

I also found this wonderful online **broken link removed** from the jeelabs.org website.

But I have absolutely no clue about how to setup these RF modules for frequency hopping. I have searched the web and found a lot of related stuff. In the process I have managed to get myself totally confused. I hope someone who has worked with these or similar RF modules will help get FHSS working for me.

Thanks in advance for your valuable assistance.

 

[chipsnsystems]

Zero response :-( I was hoping the experienced members of the board would give me at least a nudge in the right direction. I'm stuck. Help anyone?