Build easy MPLAB-6 ICD-2 for PIC18F2550

[SAR]

mplab 6

This is an In-Circuit-Debugger compatible to Microchip's new MPLAB-6 IDE (ICD2). It was designed to use as few as possible and only common parts while providing basic functionality sufficient for home use.

**broken link removed**

SAR

 

[SphinX]

build icd2

Thanx Man,

It's the simplest ICD2 i see.

http://home.t-online.de/home/520054661375/stolz.de.be/icd/text01.html

Is it working with MPLAB 6 really ?

Great Work SAR
SphinX

 

[medap]

icd2 circuit

http://home.t-online.de/home/520054661375/stolz.de.be/icd/text01.html
Using anyone so ICD2?Working it really?

 

[nooknikz]

mplab6

I'm test circuit from this web , it work !!!

 

[bjkbj701019]

icd661.hex

h**p://home.t-online.de/home/520054661375/stolz.de.be/icd/text01.html




ICD's Firmware ??????

 

[cube007]

mplab ic2

ICD's Firmware ??????

Look at here: http://home.t-online.de/home/520054661375/stolz.de.be/icd/

 

[myown]

download mplab 6

nooknikz PLEASE answer. how connect dsPIC30F2010
In MPLAB - target not found
WHICH PIN for only PROGRAMMER use

 

[bjkbj701019]

icd 2

THIS(h**p://home.t-online.de/home/520054661375/stolz.de.be/icd/)

seek ICD's Firmware to pic16f876??

 

[nooknikz]

icd2 clone usb

ICD2 -------------------------> dsPIC30F2010

Target MCLR -----------> MCLR (PIN 1)
Target PGC -----------> PGC (PIN 18 )
Target PGD -----------> PGD (PIN 17)
GND --------------------> GND

On dsPIC30F2010 , you must connect Vcc (+5V) , GND , Oscillator
and Not connect resistor between MCLR pin and Vcc for weak-pulled up to Vcc

 

[bjkbj701019]

icd0021: unable to connect with mplab icd 2

pic16f876A ICD's Firmware???

In MPLAB\ICD2 directory


this MPLAB\ICD2 directory\bl010101.hex??ok??

bl010101.hex------->>>pic16f876!!!
use 876 or 876a??

 

[nooknikz]

icd0082

bl010101.hex is bootloader.
Not firmware.

First , you must program bl010101.hex to PIC16F876
For PIC16F876A i'm not test.

 

[bjkbj701019]

icd0082: failed mplab icd 2 operation

what is firmware program??
to pic16f876(a)??
help to me ??

 

[SphinX]

how to make icd2

Salam,

Read this from the site:

The firmware for the original ICD2 is shipped within Microchip's development environment MPLAB. Download and install it. In MPLAB's subdirectory named Icd2 you will find a file named Bl??????.hex. (Actually this is nothing more than a bootloader. MPLAB later downloads the required operation system for the current target device by itself at runtime.)

Bye

 

[bjkbj701019]

icd clone

BootLoader16F877A.rar to pic16f877a!!
what to pic16f876a???


THIS(h**p://home.t-online.de/home/520054661375/stolz.de.be/icd/)
icd2 use pic16f876a??

 

[SphinX]

icd2 pic16f877

Salam bjkbj701019,

You must read



Bye

 

[Sobakava]

icd0286: unable to communicate with icd

hi,

nooknikz told me this schematic is working and I just draw schematic and PCB in protel DXP. I did not test the PCB yet, I'll make it tomorrow morning and I'll test it. It seemed ok to me now and I'm posting here.


zip file includes schematic & pcb files compatible with Protel99SE and 3D view of PCB as gif image. Actually there is something wrong with 3d view (you'll see )

hope it helps you guys! enjoy it!

regards

 

[SphinX]

diy icd for pic18f

Salam Sobakava,

Thanks.
I was building the pcb for this ICD.
I have stopped when i saw you did it.
Please can you send the pcb in PDF format (1:1 Scale) because i don't use PROTEL.

Anyway, Here is the Schematic in OrCAD 9.2 with the netlist file for every one wants to build his own pcb.

Bye

 

[crazyduck]

icd0021: unable to connect with mplab icd 2 (usb)

This the pdf file
CD

 

[SphinX]

mplab 6.0

Salam,

hi,

nooknikz told me this schematic is working and I just draw schematic and PCB in P*otel DXP. I did not test the PCB yet, I'll make it tomorrow morning and I'll test it. It seemed ok to me now and I'm posting here.

Please what is the test result ? Is it working ?

Thanks
SphinX

 

[xirix]

mplab 6 download

Does it program dsPIC devices?