need help with pins of PIC10F222

[andyyeap]

hey guys im having problems with trying programming PIC10F222, my PICKIT2 cant detect the device.
there is Vgg Vdd ground pgc and pgd
so since 10f222 doesnt have pgc and pgd how should i connect the pins of PICKIT2 to 10F222?
need help URGENT ! thanks !

 

[hexreader]

GP0 ICSPDAT = pgd
GP1 ICSPCLK = pgc

 

[ard]

PGC is also ICSPCLK, pin no 3 on an smd 10F222 and pin no 4 on a DIL.

PGD is also ICSPDAT, pin no 1 on an smd 10F222 and pin no 5 on a DIL.

If you are programming the device in circuit, make sure you dont have external comonents on these 2 lines heavily loading the Pickit2 signals.

Regards,

Anand Dhuru

 

[tpetar]

 

[andyyeap]

but still im having problem detecting the device while programming with PICKIT 2.. still i cant detect the device.. is there any other way?

- - - Updated - - -

when i try to use PICkit2 to connect the 10f222, but unable to detect, i am using breadboard to program the PIC. is it the pin unable to detect in breadboard? or any other factor, and when i try connect PGD and PGC line together in GP0, it mentioned that is an unsupported part, so wat is the problem?

 

[tpetar]

but still im having problem detecting the device while programming with PICKIT 2.. still i cant detect the device.. is there any other way?

- - - Updated - - -

when i try to use PICkit2 to connect the 10f222, but unable to detect, i am using breadboard to program the PIC. is it the pin unable to detect in breadboard? or any other factor, and when i try connect PGD and PGC line together in GP0, it mentioned that is an unsupported part, so wat is the problem?

How do you mean PGD and PGC together in PG0 ? Did you read previous posts ?

PGD Pin5
PGC Pin4

:shock: