Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

25W Energy Saver Bulb run by a 12Volt Battery

Status
Not open for further replies.
tahir4awan

tahir4awan

Full Member level 4
Full Member level 4
Joined
Nov 29, 2010
Messages
213
Helped
16
Reputation
32
Reaction score
17
Trophy points
1,308
Location
Germany
Activity points
3,116
Is it possible to run a 25Watt 220Volt AC Saver bulb with a 12Volt Battery?
 

Yes, it is possible, but the voltage must be stepped up. The CFL may be run from a high voltage DC supply. So, just stepping up the 12VDC to around 300VDC should be enough.

Here's one simple circuit you can use: https://www.siliconchip.com.au/cms/A_102473/article.html

Hope this helps.
Tahmid.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top