Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

what is the difference of Resolution bandwidth and video bandwidth in spectrum analy

Status
Not open for further replies.

alimjoco

Member level 4
Member level 4
Joined
May 22, 2011
Messages
68
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,805
What is the difference between resolution bandwidth and video bandwidth in a spectrum analyzer? How do spectrum analyzer measure spectral energy? Is it avarage power in each RBW?
 

A spectrum analyzer is nothing more than this:



The bandpass filter in the front end limits how much energy width (in frequency) gets to the power detector by setting the RBW ( and also the center frequency F0).

AFTER the power is detected, you can smooth it out (lowpass filter) with the VBW control.
 
VBW is only used for visualization.
RBW, on the other hand, strongly affects the measuring time and noise.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top