Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Need firmware to interface USB flash drive or SD card to PC via Ethernet PIC32MX795F

Status
Not open for further replies.

kotshe

Junior Member level 3
Junior Member level 3
Joined
Mar 18, 2008
Messages
30
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,503
Hi All,

I wanna Interface USB Flash disk\drive Or SD Card through Ethernet Connection, I have PIC32 Ethernet starter Kit , Can anyone please attach Frimware that can do this application .

Buttom Line to connect USB Flash disk\drive Or SD Card , to PC by Ethernet cable through PIC32MX795F

THANKS
 

i have the same kit and i need firmware too....
the firmware awailable on the microchip libraries (MDD FILE SYSTEM) is to much complex and hard to understand...
if any one can help to understand it it would be a great help...
 

Here is an appnote explaining the process of implementing an Embedded USB Host:

**broken link removed**

**broken link removed**

**broken link removed**

**broken link removed**

The bottom contains the USB Framework required to implement an Embedded USB Host.

BigDog
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top