Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] Microstrip patch antenna (Dennise Sullivan) - C or matlab code

Status
Not open for further replies.

fogrin

Newbie level 5
Newbie level 5
Joined
Jan 18, 2011
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,341
Hi

I am wondering if anyone managed to recreate/modify a code of the microstrip patch antenna described in the book by Dennise Sullivan (chapter 5, Fd3d_patch.c). I know that some codes exist, but I am not clear if anyone has actually managed to reproduce the results shown in the book.

Advise or comment would be very much appreciated.

Feodor.
 

This appears to have already been discussed in

https://www.edaboard.com/threads/111207/

Actually, the guy's real name is Denis M. Sullivan and the book is "Electromagnetic Simulation Using the FDTD Method" - next time please give some more information, but you got me interested enough to find all that out myself. :)
 
  • Like
Reactions: fogrin

    fogrin

    Points: 2
    Helpful Answer Positive Rating
Thank you roxxon

I have seen this thread, and in fact I have tried the code suggested there, but the output produced does not match the example given in the book. I compared the codes and I cannot find any big difference (apart from the added missing bits), so a bit confused whether there was any conclusion made about the general validity of the code.

If you are familiar with the problem I would be very happy to hear any further suggestions

with best regards
Feodor.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top