[SOLVED] 2 wire serial interface

Status
Not open for further replies.
One line is used for clock and other line is used for data,
A master controls the transmission and reception..
There is only one data line so only one device can transmit at a time,
and the targeted device will give acknowledgement over the data line.....
 

I2C or 2-wire serial interface cant be full duplex its either Master transmit or master recieve , or slave transmit or slave recieve .
it requires start and stop bit generation to start and end transmit and acknowledge sequence from the master or slave for sucessful recieval of data .
 

for full duplex mode u can choose SPI that is 4/3-wire communication.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…