Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

2.5V to 3.3V bidirectional communication

Status
Not open for further replies.
K

karu2uk

Newbie level 5
Newbie level 5
Joined
Jan 27, 2012
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,323
hi all!!!

I am dealing with I2C communication two devices where one is working on signal level of 2.5v and other one is working on 3.3V. I do need to interconnect those two devices would someone tell me to interconnect them.

NOTE:Since they are I2C communication system need to consider the bidirectional data signal communication
 

2.5 and 3.3 V devices can probably work in a common I2C bus segment. Otherwise there are bidirectional level converters from NXP and other manufacturers available.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top