Is it true that using a 1X probe it doesn't display glitches , transients, very small fluctuations or fine details in a waveform that is why you should always use a 10X probe. Any reasons why a 1x probe doesn't display glitches, transients, etc.
When measuring high voltages it's best to use a 100X probe even if the oscilloscopes channels max input is 500volts you can use a 100x probe to measure Killovolts?
When tuning oscillators, filter circuits or Monitoring the Microcontrollers Crystal frequency it's best to use an RF probe because of the probe loading capacitance. If you use a regular oscilloscope probe it will change the oscillators frequency or filters circuits frequency because of the probe capacitance?