1MHz Crystal Oscillator design...Please help

Status
Not open for further replies.

nikhilsigma

Full Member level 2
Joined
Jun 19, 2010
Messages
142
Helped
17
Reputation
34
Reaction score
16
Trophy points
1,298
Location
Delhi, India
Visit site
Activity points
2,584
Hey guys...

I want to make a 1MHz sine wave oscillator...with following characteristics...

1. Frequency : 1MHz.....I have a 1MHz crystal
2. Supply Voltage available : anything between +-12V
2. Voltage swing : 4Vpp peak to peak
3. Load current : 3mA

I have tried to make a colpitt oscillator with n channel JFET....but output at the emitter is very distorded...

please help....
 

What sort of output do you want? Most simple crystal oscillator circuits will not produce a nice sine-wave out.
 

"2. Supply Voltage available : anything between +-12V". if you really want to reverse the polarity of the supply voltage, you must put a bridge rectifier between the supply terminals and your oscillator, and feed the oscillator out with a capacitor in series.
why not take the output from the drain?, altering the feed back caps might improve things.
Frank
 

Status
Not open for further replies.

Similar threads

Cookies are required to use this site. You must accept them to continue using the site. Learn more…