Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
The schematics with parts list should be attached. For the power supply, vertical and horizontal schematics I had to split the scan into 4 pieces and stitch them together. I think the results turned alright, but this was my first time trying to stitch scans together, so if you can't read anything just ask. The originals are pretty easy to read.
hi, the diagrams a very helpfull to me too, sorry if my english i not so good, i´m from venezuela, and i have a bk 1420 scope, but y need information about how to calibrate this osciloscope, the scope turn on but the signal is very isnestable and erratic, if you can help me with more information about the service manual for the procedure for calibrating the scope i will be very grateful.
The scans I posted are the complete service manual. Unfortunately, the manual doesn't really include a detailed calibration procedure or troubleshooting procedure. I haven't really done too much work with this oscilloscope, and can't really provide any more help than the schematics and parts list that I posted.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
