16 bit 16 channel ADC in DIP package

Status
Not open for further replies.
G

gooofy871

Member level 2
Joined
Sep 8, 2008
Messages
46
Helped
13
Reputation
26
Reaction score
11
Trophy points
1,288
Activity points
1,517
16 bit 16 channel ADC

Hi all..

I am right now working on a project which requires a 16bit 16 channel ADC.. I got the same from many websites. But the problem is non of them is providing DIP package of the ADC. I would like to do a proof of concept test on a bread board before actually fabricating the PCB...

So is there any ADCs available in the spec?? or suggest me another way..

Thanks in advance..
 

16 bit 16 channel ADC

Hi,
Do you wish a 16 channel 16 bit solution on a chip pls or are you searching for siple 16 bit ADCs?
Such can you have over 10-15 years & at 100Ksps up tu 2Msps...
Or if you need 24 Bit,or more, S--D chips are up to 10-100Hz Bandw. tu buy...
Check by google & ADI, TI, NI, and so on
K.
 

16 bit 16 channel ADC

I have already checked for the same but the problem is every body is providing a Quad Flat package of Pin.. I wish to test my design 1st in a bread board and make sure my concept is fine which requires a Dual InLine Package, and then go for a PCB fabrication using Quad Flat package. I need an ADC which is available in both Quad flat and DIP package..!!! I could find one like this..!!

Or is there any other way I can go for a Proof of Concept other than a bread board?? How reliable will be software simulation of the design compared to a test in bread board? Could anyone recommend a good software for the same.
 

Re: 16 bit 16 channel ADC


can you do a quad flat to dip converter?
**broken link removed**
 

Re: 16 bit 16 channel ADC

gooofy871 said:
...Or is there any other way I can go for a Proof of Concept other than a bread board?? How reliable will be software simulation of the design compared to a test in bread board? ...
Click to expand...
Hi,
Of course, you can adapt your QFP to Dip, otherwise wil your selections spectrum really smaller!....
All simulators are max. so good as the modells!:-(
For me is the best verification _often the only one_ is a "knowed" measurement!
Good luck!
K.
 

16 bit 16 channel ADC

Thanks @ karesz @wpchan05
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…