Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

lcd interfacing with 8051 and 4*4 matrix keypad

Status
Not open for further replies.

munaim

Banned
Member level 1
Joined
Apr 13, 2007
Messages
37
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
0
lcd interfacing with 8051

hello everyone

can you plzzz me out i need to interface lcd n 4*4 matrix keypad with 8051 so that wat ever is the interupt on INT0 or INT1 pin of 8051 is been measured and displayed on lcd n whatever is the changes to be made in other device connected to 8051 in my case it is ultrasonic flowmeter can change the parameters needed for calculation.
and thus plzzz help me out...to interface the keypad and lcd in that way..
plzzz its urgent
 

8051 matrix

you might find what you are looking for here:
**broken link removed**
or it may give you some ideas.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top