12V and 9V isolated power supply

Status
Not open for further replies.
D

djc

Advanced Member level 1
Joined
Jan 27, 2013
Messages
402
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,298
Location
India
Visit site
Activity points
4,554
Hi

I want to build an isolated power supply. Input will be 12v DC and output is 12V and 9V but isolated. How to do that? If smps is used, which switcher should be used?. I don't have any experience with SMPS and power supply, however want to build one as soon as possible. Can anybody please guide.
 

You should use SMPS with transformer. Transformer will take care of isolation. You did not say about the current requirements?.
You can use push pull DC to DC converter with SG3525 IC or other IC

**broken link removed**
 

Thank you smijesh,

Current requirement is about 2Amps. It's being used for telephone circuit where AC voltage is required for ringing circuit. Anything else u required to know. The Post Page doesn't exists now.
 

An 18 watt supply is well within the capabilities of the simplest isolated topology, the flyback.
 

Well there are off the shelf power modules that fit your specifications, but they are a lot more expensive than a DIY circuit. A multi output flyback would be the simplest solution, if cross regulation is not a big problem.
 

Thanx guys,

Do anybody has some schematics.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…