VirusX2
Member level 4
- Joined
- Nov 18, 2014
- Messages
- 77
- Helped
- 1
- Reputation
- 2
- Reaction score
- 0
- Trophy points
- 1,286
- Activity points
- 1,855
Hi all, i have a LEM voltage transducer (LV 25-P). As the datasheet says the maximum measuring resistor is 190 or 350 ohm according to the measuring range and supply. I want to drive the output with a current to voltage op-amp so i convert the LEM's output into voltage and offset it by 2.5V. If i use the measuring resistor topology i need an 82 ohm resistor. So if i use a current to voltage op-amp can the circuit on the image work?