Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Keypad and LCD using Assembly Language

Status
Not open for further replies.
D

dodo_ahmed

Newbie level 3
Newbie level 3
Joined
Mar 1, 2018
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
29
Hello I am new here. I need to write assembly language code for 8086 microprocessor
interfacing LCD and keypad using assembly and I need the hardware schematic for connecting LCD and keypad to a FPGA for this microprocessor
 

FPGAs don't run 8086 software. You have to show us a proposed schematic of what you are trying to achieve.

Are you saying you have an FPGA that controls a keyboard and LCD and you want 8086 code to interface to it -or- are you asking for code the interfaces the keyboard and LCD to the 8086 and it also controls an FPGA?

Brian.
 

I have to design a MIPS microprocessor its instruction set a little bit similar to that of 8086 so I need this microprocessor on a FPGA to control an application using LCD and keypad on a PCP and here is the instruction set

Screen Shot 2018-03-02 at 8.18.06 AM.jpgScreen Shot 2018-03-02 at 8.16.10 AM.jpgScreen Shot 2018-03-02 at 8.16.35 AM.jpgScreen Shot 2018-03-02 at 8.16.49 AM.jpgScreen Shot 2018-03-02 at 8.16.58 AM.jpgScreen Shot 2018-03-02 at 8.17.26 AM.jpgScreen Shot 2018-03-02 at 8.17.34 AM.jpgScreen Shot 2018-03-02 at 8.17.43 AM.jpgScreen Shot 2018-03-02 at 8.17.50 AM.jpgScreen Shot 2018-03-02 at 8.17.59 AM.jpgScreen Shot 2018-03-02 at 8.15.53 AM.jpg
 

LCD and keypad interfacing with FPGA using assembly

Hello,
I need to design a MIPS microprocessor on an FPGA to control an application using lcd and keypad and I need to interface them with fpga so how can I do that with assembly and hardware?
 

Wait. Initially you asked for a schematic on how to connect an LCD and keypad to an FPGA. Now it sounds like you're asking us to do the complete design for you. Maybe try a specific question; nobody here is inclined to do all your work for you.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top