Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Electric guitar – own construction

Status
Not open for further replies.
V

Vermes

Advanced Member level 4
Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Visit site
Activity points
22,318


Construction materials:
  • body – ash
  • neck - alder
  • fingerboard - oak
The scale used is 25.5'', and the griffin was screwed to the body by 4 screws.
The body was covered by several layers of graphite color rustic stain and lacquer (coming on after the stain). For a better result than shown on pictures, do not do it by a brush, because it produces inequalities (it can be repaired by sandpaper but it's hard to do).
Places for humbuckers, knobs and switch were cut with chisel and hammer. The electronics are from Seymour Ducan project. The guitar plays very well “clean” and has a bright sound.








Link to original thread – Gitara elektryczna - własna konstrukcja
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top