Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Can I program at89c51rd2 with SPI programmers for 89s51?

Status
Not open for further replies.
N

naseerak

Full Member level 5
Full Member level 5
Joined
Jun 14, 2003
Messages
241
Helped
19
Reputation
38
Reaction score
19
Trophy points
1,298
Activity points
1,222
at89c51rd2 spi

My friends i am in confusion I want to programm at89c51rd2 is it possible to do so with spi programmers for 89s51 etc
 

at89c51rd2+serial programmer

http://www.atmel.com/dyn/resources/prod_documents/doc4235.pdf

in doc4235.pdf on the first page see third feature.
- ISP (In-System Programming) Using Standard Vcc Power Supply

Maybe, if your programmer has support for this device :)))
Flash programming - 3 ways.
1. ISP with bootloader
2. Boot-Rom low level routines
3. standard parallel programming

see on page 96 in this document...
 

Re: at89c51rd2

Hi
You are right but I need fully built programmer And dont want to hang around for new devlopment of programmer
 

Re: at89c51rd2

PEACE TO ALL
I AM STILL IN SEARCH OF SPI CABEL FOR AT89C51RD2 BUT TO NO VAIL CAN SOMEBODY GIVE ME MEANIGFUL INFORMATION OR READY MADE SCHEMATIC
 

Re: at89c51rd2

cable schematic for flip & 89c51rd2
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top