Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] How to setup a Step u Transformer in Proteus-for simulation

Status
Not open for further replies.
thannara123

thannara123

Advanced Member level 5
Advanced Member level 5
Joined
Jan 7, 2010
Messages
1,602
Helped
122
Reputation
244
Reaction score
116
Trophy points
1,353
Visit site
Activity points
10,631
How to setup a Stepdown Transformer in Proteus-for simulation

How to setup a Step down Transformer, with 230v primary input and 6 volt secondary output in Proteus ?

Capture.JPG

Dow does the calculation ?
 

If you use 1 H for the primary and 680 uH for secondary, it should be close.
1/(230/6)^2=[680.5293u]
 

Attachments

  • xfmr.png
    xfmr.png
    35.9 KB · Views: 425

If you use 1 H for the primary and 680 uH for secondary, it should be close.
Click to expand...
Yes. Besides correct voltage ratio, the magnetizing inductance should be scaled appropriately. 1 H means 0.73 A magnetizing current, expectable for a 10 or 20 kW transformer.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top