Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help on cascade wide swing bias circuit

Status
Not open for further replies.
W

whylinkk

Guest
Newbie level 1
Hi everyone,

I am designing a folded cascade opamp that need biasing. I have a problem on designing transistors W/L. How to i get the transistor W/L for the transistors? The biased circuit is attached.

7643028_orig.jpg

My Vdd is 1.8V
The current is 20uA

Vgsn = 534.774m
Vthn = 438.382m
Vgsp = 724.358m
Vthp = 471.562m​

The values that i have to get for

VBp = 1.08V
VCp = 0.61V
VCn = 0.95V
VBn = 0.7V​

Thanks in advance.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top