Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Short channel effect on Threshold Voltage of a MOSFET.

Status
Not open for further replies.

iVenky

Advanced Member level 2
Advanced Member level 2
Joined
Jul 11, 2011
Messages
584
Helped
37
Reputation
76
Reaction score
35
Trophy points
1,318
Location
College Station, Texas
Activity points
6,124
In a short channel MOSFET the source-drain charge increases when compared to the channel charge (in the static conditions). So what will happen to the threshold voltage? Will it increase or decrease?
 

In short channel MOSFETs threshold voltage decreases. This effect is called Drain Induced Barrier Lowering

http://www.cs.ucl.ac.uk/staff/ucacdxq/projects/vlsi/report.pdf

thank you for your help

---------- Post added at 12:27 ---------- Previous post was at 12:26 ----------

In short channel MOSFETs threshold voltage decreases. This effect is called Drain Induced Barrier Lowering

http://www.cs.ucl.ac.uk/staff/ucacdxq/projects/vlsi/report.pdf

thank you for your help
 

In short channel MOSFETs threshold voltage decreases. This is correct.
 

Who is correct?

Both probably. In the 180nm process I'm working in now the Vt increases for shorter channels. I seem to remember a process where Vt went down as channels got shorter but can't say for sure... it seemed like it went down for one MOS type and up for the other.

DIBL is a lowering of Vt with an increase in drain voltage. Its effect is greater in shorter channel devices, but Vt is a function of length even without DIBL.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top