Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

what is difference between layout exchange formate and library exchange format?

Status
Not open for further replies.
S

skn.1357

Newbie level 4
Newbie level 4
Joined
Sep 12, 2011
Messages
6
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,314
Hello there
what is difference between layout exchange formate and library exchange format? are they both represent the same thing or are different??
thanks in advance...
 

Library Exchange Format (LEF) is a specification for representing the physical layout of an integrated circuit in an ASCII format. It includes design rules and abstract information about the cells. LEF is cadence propitiatory. Design Exchange Format (DEF) represents the complete physical layout of an integrated circuit while it is being designed. DEF is used to exchange layout across various physical design tools or with in same tool. So you can call a DEF as layout exchange format.
 
yadavvlsi said:
Library Exchange Format (LEF) is a specification for representing the physical layout of an integrated circuit in an ASCII format. It includes design rules and abstract information about the cells. LEF is cadence propitiatory. Design Exchange Format (DEF) represents the complete physical layout of an integrated circuit while it is being designed. DEF is used to exchange layout across various physical design tools or with in same tool. So you can call a DEF as layout exchange format.
Click to expand...

LEF is more metal specific where as DEF is placement specific. DEF defines the absolute location of the cells as well where as LEF does it only for the layers used. ".lib" is the library or reference book for the pnr tool to extract timing and logic info required for the cells used in the design.
 
jeevan.life said:
LEF is more metal specific where as DEF is placement specific. DEF defines the absolute location of the cells as well where as LEF does it only for the layers used. ".lib" is the library or reference book for the pnr tool to extract timing and logic info required for the cells used in the design.
Click to expand...

Thank you very much for reply...
 

Def could contains netlist, routing, placement, scan info, port...
Lef is a simplify view of macro/pad views instead using GDS, that should contain the pin (metal position size type) and obstruction to allow the PnR to route it.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top