Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PIN Diode model problem in ADS

Status
Not open for further replies.
E

ericz

Junior Member level 3
Junior Member level 3
Joined
Jul 2, 2005
Messages
27
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,579
ads,pin diode

Hello everyone,

I am new to ADS and I encountered a problem.

I wish to simulate Variable attenuator using PIN diodes.

when I place the PIN diode and Trans Simulation and runned simulation

The software gave me an error in the simulation window:

" "NLPIN1" is an instance of an undefined model "NLPINM1" "

My question is, How do I define this model so I will able to run the simulation?

Is there any way to link the model file to the component I placed at the schematics?

Regards,
Eric
 

Re: ads,pin diode

Hi,
I am also trying to build a variable attenuator with PIN diode. I also want to use NLPINM1 in ADS but unable to do so. Your post is almost 6 years old that's why I am thinking maybe you have already solved your problem and can help me to. :-(

Regards
 

YOu should be able to do that from simulation setup. You need to include the model library file which contains this device model.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top