Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to test a Bidirectional Transil diode or (TVS) diode ? thanks

Status
Not open for further replies.

dineshdeshmuk

Full Member level 5
Full Member level 5
Joined
Sep 12, 2011
Messages
285
Helped
18
Reputation
36
Reaction score
18
Trophy points
1,298
Activity points
3,131
How to test a Bidirectional Transil diode or (TVS) diode ?

thanks
 

General............
Transient voltage suppression diode - Wikipedia, the free encyclopedia

example datasheet..........
**broken link removed**


Component test procedure is same as test for Sidac
https://www.edaboard.com/threads/227947/

Bidirectional Transil diode  (TVS)_tes_01.jpg
 
Look above, previous post, part of datasheet, lowest row............( for example)

P6SMB12A component marking / type >> 12A unipolar means for DC (like zenerdiode) >> 12C bipolar for AC (like varistor, etc)

VBR at IT min & max. these are breakdown voltages when current IT is 1mA, The different values ​​indicate the manufacturing tolerances

This VBR is the value you should find when measuring voltage across component and when current value is IT through RL and test component
Supply voltage must be high enough to generate the current IT in test circuit. ( You can calculate values same way as zener and resistor in series )

For reading VBR you can use voltmeter or oscilloscope
 
Look above, previous post, part of datasheet, lowest row............( for example)

P6SMB12A component marking / type >> 12A unipolar means for DC (like zenerdiode) >> 12C bipolar for AC (like varistor, etc)

VBR at IT min & max. these are breakdown voltages when current IT is 1mA, The different values ​​indicate the manufacturing tolerances

This VBR is the value you should find when measuring voltage across component and when current value is IT through RL and test component
Supply voltage must be high enough to generate the current IT in test circuit. ( You can calculate values same way as zener and resistor in series )

For reading VBR you can use voltmeter or oscilloscope

For this very same part " P6SMB12A " , the output should be remain same i.e. between the minimum & maximum values (11.4 V to 12.6 V) while we changing the Input voltage supply whether AC or DC . Am i right ?

And, what range of input variable supply voltage should be provided to the TransZorb ?

thanks a lot
 
Hey man read careful .................
12A unipolar means for DC (like zenerdiode)
12C bipolar for AC (like varistor, etc)

TRANSZORB® Transient Voltage Suppressors
These are same components..........
and datasheet says......
Polarity: For uni-directional types the color band
denotes cathode end, no marking on bi-directional
types
https://www.vishay.com/docs/88301/15ke.pdf
 
Hey man read careful .................
12A unipolar means for DC (like zenerdiode)
12C bipolar for AC (like varistor, etc)

TRANSZORB® Transient Voltage Suppressors
These are same components..........
and datasheet says......
Polarity: For uni-directional types the color band
denotes cathode end, no marking on bi-directional
types
https://www.vishay.com/docs/88301/15ke.pdf

ok, ok thanks

but what should be the measuring voltage for a good uni-directional TransZorb ?

And, what should be the measuring voltage for a good bi-directional TransZorb ?
 
The power dissipation across TransZorb = VBR * 1mA
The power dissipation across RL = 10V * 1mA
The power dissipation RL + TransZorb = (VBR + 10) * 1mA
 
The power dissipation across TransZorb = VBR * 1mA
The power dissipation across RL = 10V * 1mA
The power dissipation RL + TransZorb = (VBR + 10) * 1mA

great reply
 
  • Like
Reactions: Danny3

    Danny3

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top