Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Can u kindly rougly tell me passband regions for these two graphs

Status
Not open for further replies.
moonnightingale

moonnightingale

Full Member level 6
Full Member level 6
Joined
Sep 17, 2009
Messages
362
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,298
Activity points
3,832
Can u kindly rougly tell me passband regions for these two graphs
 

Attachments

  • passband.gif
    passband.gif
    19 KB · Views: 140

Cut the largest lobe with a line perpendicular to y-axis at -3db. The two points at which the line cuts the lobe gives you the passband.

Fig 1. 1.3 to 1.4(approx)
Fig 2. 0.65-0.8(Approx)
 

Thanks a lot
Devilwar
Can anybody second him and confirm his answer
 

Actually the passband is assumed from where power is greater than or equal to half. So voltage/ current becomes 1/root(2). Now 1/root(2) is -3db in log scale.
log(10) 2= 0.3010
20 log(10) root(2)=10 log(10) 2= 3.010
almost = 3db
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top