Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help identifying unknown components, easy.

Status
Not open for further replies.
C

Cew27

Newbie level 2
Newbie level 2
Joined
Oct 11, 2011
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,296
hey guys, my first report for uni is due in soon. basically just have to identify unknown components from the i/v characteristics.
Untitled.png
Untitled1.png
Untitled2.png
these are the graphs i am to use to conclude the identification of the components.
the middle graph is obviously a resistor as i/v are directly proportional
the other two i believe to be diodes.
one possible a schottky the other a zener?
any help and/or links to information about this subject is much appreciated.
 

Attachments

  • Untitled.png
    Untitled.png
    43.7 KB · Views: 159
  • Untitled1.png
    Untitled1.png
    45.4 KB · Views: 137
  • Untitled3.png
    Untitled3.png
    45.2 KB · Views: 157

Cew27 said:
the middle graph is obviously a resistor as i/v are directly proportional
the other two i believe to be diodes.
one possible a schottky the other a zener?
Click to expand...

Yeah I think, first one is for normal Si diode...second one is for resistor....and third one is for zener diode.
 

would the first graph not be the zener diode? due to the lower reverse breakdown voltage?
 

Nopes...Zener diodes usually have large reverse breakdown voltage that's what which make them different from common diodes.

Breakdown voltage for commonly available zener diodes can vary widely from 1.2 volts to 200 volts....
 
2010ee179 said:
Nopes...Zener diodes usually have large reverse breakdown voltage that's what which make them different from common diodes.

Breakdown voltage for commonly available zener diodes can vary widely from 1.2 volts to 200 volts....
Click to expand...
If you follow the order of the graph:
1. Zener diode
2. Resistor
3. Schottky Diode
 

Yes, logicon is right. The details of the plot at the bottom may also help but it is difficult to make out what is what ? These are qualitatively and quantitatively different.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top