Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Baseband pulse transmission problem

Status
Not open for further replies.
P

pnsakanjankumar

Member level 2
Member level 2
Joined
Apr 13, 2011
Messages
49
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
India
Activity points
1,625
for ISI to be zero we should chose Nyquist channel which has a data rate of Rb=1/Tb=2W where W is the channel Bandwidth.
Now when we use Raised cosine spectrum system Bandwidth is W(1+α) where α is the roll off factor
suppose α = 1
then Bandwidth is 2W but Rb the data rate should be the same because those sampled spectrum are space apart by Rb
given by
P(F)+p(F-2W)+P(F+2W)=1/2W -W<f<W
I want to know whether it is right or not?
Please Help me ?:sad:
 
Last edited:

The data rate is still Rb. The functional "p" seems to be a spectral operator, do clarify on exactly what you mean by "p".
If you want to know the implication of the roll-off factor on the bandwidth, then that should not be a concern.
The roll off is there to create a more realizable filter. Ideally $\alpha = 0$.
ISI:
If $\alpha=1$ then you have a signal with an ISI assuming you have the same sampling rate of 2W, wherein the op= current_ip + past_ip.
Typically systems are causal so you consider the impact of the previous ip not the future ip.
 
pnsakanjankumar said:
I want to know whether it is right or not?
Click to expand...
Right.
Although there are some upper/lower case issues in pnsakanjankumar's post, P(f) is the Fourier transform of the received pulse.
Note that not only alpha=0 is unrealizable; it is not desirable as a because:
- in time domain the pulse decays slowly (as 1/t), so truncation of the response causes more distortion than with a "decent" alpha
- the eye would be closed in practice: intollerant to synchronization misadjustment
Regards

Z
 
Now if we want to achieve Ideal bandwidth possible that is W in this case we use Duobinary Signalling
Explain how we get such a bandwidth using Duobinary Signalling ??
 

Duobinary signalling i.e. a partial response channel for transmission over W is viable but it must be noted that this is possible since we know the behaviour of the ISI e.g., '1-D' where D is the delay of one time sample. Since the ISI behaviour is known we are able to equalize it at the output.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top