Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

broadband branchline coupler

Status
Not open for further replies.
R

rangaprasad

Newbie level 1
Newbie level 1
Joined
Sep 13, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,289
I designed branch line coupler for 1.6GHz.
My desired frequency is 800-2500MHz.
I want to design 3dB response for entire band width.
How to design the broad band coupler for required band width.
 

In AWR, there is some examples:
Stripline_Coupler: 1.8~2.8GHz
Hybrid_Coupler
You can try to modify these files to get your target.
Good luck.
 

I said tough as the freq BW is more than 1.5 octaves by the goal.
The example is less than octave.
I suggest design of Power divider than hybrid coupler for this application.

Regards,
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top