arupbsk
Member level 1
PIC24J64GA002 is a 3.3volt chip and I heard that the JDM based designs that use PCs COM port, can work only with 5volt PICs.
Can I use resistor based voltage divider in programming pins to use that? Or, what I should do?
I'm not in mood of buying or making IDC or PicKit.
But if those are the only way, then give me a link of diy project of making the kit.
(I know there are lots of threads here about those, but give me a link of that device customized to use with 3.3Volt devices. )
Can I use resistor based voltage divider in programming pins to use that? Or, what I should do?
I'm not in mood of buying or making IDC or PicKit.
But if those are the only way, then give me a link of diy project of making the kit.
(I know there are lots of threads here about those, but give me a link of that device customized to use with 3.3Volt devices. )