Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Struck at FAULT IN SEQUENTIAL CIRCUIT

Status
Not open for further replies.
T

tusharjoshi

Newbie level 3
Newbie level 3
Joined
Aug 8, 2011
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
DELHI
Activity points
1,306
Stuck at FAULT IN SEQUENTIAL CIRCUIT

How to obtain the input bit sequence to check stuck at zero or stuck at 1 fault in SEQUENTIAL CIRCUIT ?
 
Last edited:

Read:
1. Digital systems testing and testable design by Miron Abramovici
2. Essentials of electronic testing for digital, memory, and mixed-signal VLSI circuits by Michael Lee Bushnell and Vishwani D. Agrawal
 
You can use an ATPG (Automatic Test Pattern generation) tool to generate the input sequence (test patterns).
Eg : Tetramax (Synopsys), Fastscan (Mentor Graphics)

@Tushar : Note its "stuck-at" fault not "struck-at"
 
Last edited:
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top