Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Simulation Duration Settng in Liberty NCX ...

Status
Not open for further replies.
Oveis.Gharan

Oveis.Gharan

Full Member level 4
Full Member level 4
Joined
Oct 21, 2006
Messages
197
Helped
34
Reputation
68
Reaction score
25
Trophy points
1,308
Location
Iran
Activity points
2,503
Simulation Duration Setting in Liberty NCX ...

Salaam everybody.

Is there anyone who knows that in library generation with Liberty NCX, how simulation duration of cells could be set ?
In my runs, unfortunately the simulations are ended before measurement output obtaines and i need to lengthen simulation till all measurments of cell specs obtain but i do not know how could i lengthen the simulation durations in Liberty NCX.

Thanks in advance.
Alireza
 
Last edited:

Re: Simulation Duration Setting in Liberty NCX ...

The simulation stop time that is determined by Liberty NCX is based on an
equation that uses clk_width as the variable.

So if the default simulation stop time is short, you can increase it by
increasing the value of clk_width. The default value of clk_width is 1 ns.

kinchit
 
Is there any ability to characterize the memories with Liberty NCX?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top