nitishn5
Full Member level 6
- Joined
- Mar 27, 2011
- Messages
- 382
- Helped
- 92
- Reputation
- 186
- Reaction score
- 102
- Trophy points
- 1,323
- Location
- Bangalore, India, India
- Activity points
- 4,319
I need to make a Current Source controlled by a PIC 16F877A which should be able to
1. Set the Current Range - 0 to 500uA
2. Give up to 2 different Square Waveforms of frequency 10 mHz to 10 Hz with adjustable duty cycle with resolution 0.1%
3. Shut off when current/voltage exceeds a limit.
4. Display the current, voltage, duty cycle, frequency on a 16x2 LCD display.
Will I be able to do all this using the PIC 16F877A??
1. Set the Current Range - 0 to 500uA
2. Give up to 2 different Square Waveforms of frequency 10 mHz to 10 Hz with adjustable duty cycle with resolution 0.1%
3. Shut off when current/voltage exceeds a limit.
4. Display the current, voltage, duty cycle, frequency on a 16x2 LCD display.
Will I be able to do all this using the PIC 16F877A??
