Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

When to use a single VCO

Status
Not open for further replies.
B

brookning

Newbie level 6
Newbie level 6
Joined
Dec 8, 2010
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,353
Hello there,

I have a question when to use a single VCO in the real world? I read lots of materials and I find it's popular to use PLL as LO or frequency source. However, I think since the VCO has a tuning range and it is able to be tuned to a indicated frequency point, why the writers of those materials do not simply use single VCO to provide LO signals?

What about the situation in the millimeter wave band like V band and W band?

Thank you very much.
 

Because the stand alone VCO without PLL is a free-running component, which means it has the variation on frequency and it's time variant. And in most applications, the stable source is preferred.
 
Thanks, Chang.

So how those systems, where the alone VCO structure is adopted, avoid the unstable problems you mentioned?

Or in other words, what kind of applications could suffer those unstable problems?
 

You can use a single VCO in systems where you transmit and receive in the same box, and can share the VCO between them. A short range FMCW radar is an example--the vco can not drift very much between transmit and recieve times, so you do not have to lock it. Toys, cheap radios, etc can also use unlocked VCOs.

In applications where you need to receive at a distance what is transmitted, and you do not want to tune the receiver LO vco to try to find the signal, will need a locked VCO.
 
All VCO's are temperature dependent under the sun and that's why a PLL is used to keep them stable.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top