Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

frequency selective reflection surface

Status
Not open for further replies.

liusupeng

Advanced Member level 4
Full Member level 1
Joined
Jun 7, 2009
Messages
101
Helped
5
Reputation
10
Reaction score
4
Trophy points
1,298
Visit site
Activity points
1,898
i want to construct a surface which selectively reflect the desired frequency with high Q. Can any one give me some ideas?
 
  • Like
Reactions: wahed

    wahed

    Points: 2
    Helpful Answer Positive Rating
Its 100% possible with Frequency Selective Surface. You can achieve all filtering responses.
 
  • Like
Reactions: wahed

    wahed

    Points: 2
    Helpful Answer Positive Rating
Well I am not sure about this idea but you can make a device instead of surface which can receive all EM waves and will transmit a particular band of freq. to the further level by limiting other frequencies by use of band pass concept.
 
  • Like
Reactions: wahed

    wahed

    Points: 2
    Helpful Answer Positive Rating
Refer the paper "Application of Double Layer Frequency Selective Surface for SMPS shielding". FSS is used to block the particular band of EM wave.
 
  • Like
Reactions: wahed

    wahed

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top