Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

CD-ROM Drive Stepper motor

Status
Not open for further replies.
M

minhlam

Member level 2
Member level 2
Joined
Nov 15, 2004
Messages
48
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,288
Activity points
323
85_1309460292.jpg

Dear All
Please help me to know timing driver this stepper motor (in DVD )4 wires.
Thank you so much.
 

4 wires suggest a standard bipolar 2-phase scheme. You need two full bridge drivers to supply it.
 
FvM said:
4 wires suggest a standard bipolar 2-phase scheme. You need two full bridge drivers to supply it.
Click to expand...
Dear FvM
Thank you so much for your help.But you can tell me more timing for driver(CW)
only.
Exp:
step(time) (coil1) a b (coil 2) c d
1 H L L H
2 - - - -
3 - - - -
--
-- - - - -
Thanks again for your time.
 

Dear Miter_rf
I am very very satisfied your helpful and your time to make clearly diagram .Thank you a lot.
 

    V

    Points: 2
    Helpful Answer Positive Rating
What is the maximum operating dc voltage of CD ROM stepper motor(as shown in first picture of this page)?i found different ratings in different websites.my one is DVD ROM stepper motor.Are CD ROM and DVD ROM stepper motor same in voltage ratings?Suggest me.
 

Ahmmed Razu said:
What is the maximum operating dc voltage of CD ROM stepper motor(as shown in first picture of this page)?i found different ratings in different websites.my one is DVD ROM stepper motor.Are CD ROM and DVD ROM stepper motor same in voltage ratings?Suggest me.
Click to expand...
=======================================
You can use 5vdc to 9vdc but motor is started working at 3vdc. But if your motor is warm(normal is not warm) please checked the timing driver. Thank you
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top