Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help me about matching...

Status
Not open for further replies.
Sidramareddy

Sidramareddy

Junior Member level 3
Junior Member level 3
Joined
May 31, 2011
Messages
28
Helped
7
Reputation
14
Reaction score
6
Trophy points
1,283
Location
Bangalore, India
Activity points
1,418
Q:Which type of matching technique is good for Resistors, Capacitors & BJT's....? n plz tell me the reason behind of choosing it....
 

In no particular order, a probably incomplete list:

- Common centroid to have first order compensation of process gradients

- same orientation, reduces sensitivity to non-planarity in process steps

- same surrounding (use dummies, similar connections, avoid close conductors mismatches), to limit the second order effect coming from other implants and stresses around the device

- proximity, to avoid long range variations
 
all of them, keep them close, with the same orientation, organize them in a common centroid geometry and add dummies
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top