Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to fix EMIR violations

Status
Not open for further replies.
N

nguyencamly

Junior Member level 1
Junior Member level 1
Joined
Jan 4, 2007
Messages
19
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,283
Activity points
1,370
Hi all,

Can everyone explain to me what is EMIR. How to fix EM and IR violations?

Regards,

Cam Ly
 

Electromigration
Electromigration is the mass transport of metal resulting from the transfer of momentum between conducting electrons and diffusing metal atoms. It occurs in metal wires that conduct high current densities. This problem can be minimized by limiting the current density in metal conductor lines, vias, and contacts.

IR drop
IR drop is a reduction in voltage that occurs on the VDD network of an integrated circuit because of the current flowing through the resistance of the VDD network itself (V = I x R). You can look into foundry docs for sheet resistance to calculate IR drop.

You can find more details and ways to overcome them in some good layout books available.

---------- Post added at 12:00 ---------- Previous post was at 11:57 ----------

Also you may find following links as helpful:

https://www.mentor.com/products/sil...d/2010_ASPDAC_Emulating-and-Diagnosing-IR.pdf

**broken link removed**
 
- How a good layout?
- More details about how to reduce EM.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top