Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
i brought 16x2 lcd of crystalonic CDM 16216B and it seems that it has 16 pins marked 1 to 16... can any one help to let me know which pin stands for what(i,e;r/w, do...d7) ... please help...
if you keep LCD in the front ( i.e.second diagram) then the outer most pin at the corner is pin1 and so on..
pin 1: gnd
pin2 : VCC
pin3: VEE ( potentiometer 10K)
pin4: rs
pin5: r/w
pin6: en
pin7: D0
pin8: D1------------- pin14: D7
pin15: VCC
pin16: gnd
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
