Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to change the temperature coefficient in cadence

Status
Not open for further replies.
G

geozog86

Member level 3
Member level 3
Joined
Oct 24, 2010
Messages
54
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,774
Hello!
Do you know if i can change the temperature coefficient of a resistor in my simulation and how? I am using cadence.

Thank you very much
 

Is this a resistor for a PDK library or analogLib?
for a PDK) make a copy of the foundry models and edit it
for analogLib) there is a field in the CDF for this
 
In addition, if you are using an ideal resistor from analogLib, press "q" or "shift+q" and the properties windows will appear. (Or select the resistor and go to menu edit - properties) There, you can define TC1 and TC2.
Regards,
 
Thx both! i will try to manipulate the ideal resistor for my own operation (sounds easier) and if it doesn't work then change the model! Thx again :)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top