Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What is a paste mask and what is it used for?

Status
Not open for further replies.

kabaleevisu

Advanced Member level 2
Advanced Member level 2
Joined
Apr 14, 2010
Messages
616
Helped
85
Reputation
170
Reaction score
81
Trophy points
1,308
Location
Chennai,India
Activity points
4,512
Hi every one

1.what is paste mask ???
2. what is the use of it.??
why paste mask (TOP,BOT) gerber file give to manufacturer from 4 layer

i never give paste mask gerber for 2 layer board to manufacturer what is the reason
 

Re: what is pastemask ??

Paste Mask

A stainless steel template in a tightened frame, with holes corresponding to landpatterns on the bare board that are either cut, punched, or drilled with a laser. The solder stencil is used at the beginning of the circuit assembly process where it is placed on top of a bare board, solder paste is pushed through the holes, then the stencil is lifted away. This leaves small solder paste deposits on the bare board, onto which components are placed.


 
Re: what is pastemask ??

why paste mask (TOP,BOT) gerber file give to manufacturer from 4 layer
Solder paste output don't need to be included with the PCB manufacturer data set. But many designers find it reasonable to send the complete gerber data to all involved parties.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top