Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Connecting SIM300 with Hyper Terminal

Status
Not open for further replies.
A

arslanshahid

Newbie level 4
Newbie level 4
Joined
Jan 23, 2009
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,305
Hi, I m connecting SIM300 Module with Hyper terminal using MAX232 circuitry. But when i open the terminal, it shows random ASCII characters before pressing any key as well as after pressing any key. Can anyone please help me in this ?
 

Ok. What should be the baud rate for SIM300 DZ ?
 

give the command AT+IPr=? and you will get a set of possible baud rates for sim300..... after you set the baud rate on the modem, set the same baud rate on hyperterminal... thats it...
 
SIM300 support 1200,2400,4800,9600.... Buad Rate
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top