Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

pcb layer printing in Altium

Status
Not open for further replies.
P

proyex

Newbie level 4
Newbie level 4
Joined
Nov 2, 2007
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,323
hi, i need to print the artwork of my pcb design, because i want to make my pcb with PCB transfer film paper, os i only need to print bottom layer and later a second printing of top layer, question is how i do this, because when i print, all layers are printed
i use altium summer design 09
thanks
 

file -> print preview then right click and "configuration". finally right click for the insert layer or delete layer....
 
  • Like
Reactions: proyex

    P

    proyex

    Points: 2
    Helpful Answer Positive Rating
zula said:
file -> print preview then right click and "configuration". finally right click for the insert layer or delete layer....
Click to expand...


thank you very much, its ok
 

check for the scaling of your design you have to set scale to 1:1 while printing directly from PCB I would rather suggest you to print it through CAM tool (CAMTASTIC).
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top