Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Altium: how to change all line width from the whole board at once?

Status
Not open for further replies.
K

kelsjc

Newbie level 4
Newbie level 4
Joined
Jun 17, 2009
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Sao Paulo - Brazil
Activity points
1,310
Hi all!


I need to change all line width from the whole board at once on Altium.

Is there any way to do it automatically?



Thanks in advance

Kelson
 

Yes, you select the tracks you want to change using "Find Similar Objects", then change them all at once with the "PCB Inspector"

First, you click on a track to select it, then right-click -> Find Similar Objects to select all tracks (set the width to "same" if you want to select only tracks of the same width). The "PCB Inspector" panel will open if you had the "Run Inspector" box checked (default). You then change the track width in the PCB Inspector and all selected tracks will change. If you want to enforce a track width you should modify or create a "Width" design rule so it will be enforced during DRC.
 
kevin54 said:
Yes, you select the tracks you want to change using "Find Similar Objects", then change them all at once with the "PCB Inspector"

First, you click on a track to select it, then right-click -> Find Similar Objects to select all tracks (set the width to "same" if you want to select only tracks of the same width). The "PCB Inspector" panel will open if you had the "Run Inspector" box checked (default). You then change the track width in the PCB Inspector and all selected tracks will change. If you want to enforce a track width you should modify or create a "Width" design rule so it will be enforced during DRC.
Click to expand...


Exactly what I was looking for!! It worked perfectly!

Thanks Kevin
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top