Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Which pin to use for programming PIC10f200t with ICD2 clone?

Status
Not open for further replies.
B

brew

Member level 3
Member level 3
Joined
Mar 4, 2011
Messages
59
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Activity points
1,693
i am using an ICD2 clone. it has 5 pins for programming PGC, PGD, GND, +5v, and Vpp. i don't know what specific pins to connect to the pic that i am using, (PIC10f200t).

also, what does PGC and PGD stand for? these are the two pins i am confused of.

regards, drew.
 

Re: help with ICD2 clone

Hi,

If you look at the chip pinout in the datasheet it clealry shows which pin is which.

PGC or ICSPCLK = program clock PGD or ICSPDAT = program data

PGD - GP0
PGC - GP1
VPP - GP3
 
  • Like
Reactions: brew

    B

    brew

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top