Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Some Unconnected Components in RTL Schematic Generated by XST

Status
Not open for further replies.
blooz

blooz

Advanced Member level 2
Advanced Member level 2
Joined
Dec 29, 2010
Messages
560
Helped
121
Reputation
242
Reaction score
116
Trophy points
1,343
Location
India
Activity points
4,985
Some component in the RTL Schematic Seems Unconnected but the simulation Works

What Could be the Reason or is it actually connected to ground.

65_1300198400.jpg
 

It usually is because you did not connect it in the module port list. If it is connected to ground, then clicking on the node should show this.

Then again, if it is really not connected then I would expect the and2 and or2 up there to be optimized away...
 
  • Like
Reactions: blooz

    blooz

    blooz

    Points: 2
    Helpful Answer Positive Rating
RTL these is only graphic scheme of functional behaviour , Technology shematic will show realistic implemention. OR AND and other functions will translate into LUTs.
 
  • Like
Reactions: blooz

    blooz

    blooz

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top